Lift and Access March-April 2026 | Page 6

BBMLIFT has introduced its latest tracked scissor lift, the BS0408T, adding to its tracked models series with a focus on all-terrain access and stability.

The BS0408T offers a 5.9-meter( 19.36-foot) working height, 200-kilogram( 440.92-pound) lift capacity and a narrow 0.81-meter( 2.66-foot) overall width. It provides zero-radius turning and 30 % gradeability, making it suitable for a range of indoor and outdoor applications. Nonmarking tracks support smooth operation on sensitive surfaces.

Key components include Danfoss pressure sensors( Denmark), Schneider limited switches and emergency stop button( Germany), Fullriver maintenancefree batteries( USA) and Curtis motor controllers( USA). The power station and battery tray are fully removable, allowing easier maintenance and repair.

BBMLIFT highlighted the lift’ s safety and operational features,

Sinoboom has launched the all-electric, oil-free 0407ET crawler mini-scissor lift, designed for use across a range of indoor and outdoor work environments. The model is intended for applications where emission sensitivity and surface protection are key considerations.

The 0407ET replaces traditional hydraulic components with an electric lift actuator and a low-maintenance AC drive motor. As a result, the machine operates without hydraulic oil, reducing the risk of leaks in environments where contamination could present operational challenges. The design also supports simplified maintenance through an easyaccess layout, including a pull-out battery tray housing an AGM maintenance-free battery and an open chassis that allows direct access to internal components.

The crawler mini-scissor lift is equipped with non-marking rubber tracks to minimize surface impact while maintaining mobility across uneven terrain. The unit offers 30 % gradeability including foldable guardrails, roll-out deck extension, proportional controls, emergency stop, overload protection, descent protection alarm, tilt protection, manual lowering valve, flashing amber light, motion alarm, fault diagnosis system, hour meter and automatic braking system.

The BS0408T complies with CE and EN280-1:2022 standards, ensuring adherence to international safety and performance requirements.

and a zero turning radius, supporting maneuverability in confined spaces. It has a rated load capacity of 230 kilograms( 507.06 pounds), allowing operators to transport tools and materials during elevated work.

Transport and handling are supported by a single lifting point and integrated side forklift pockets. The 0407ET is CEcertified, meeting applicable safety and quality requirements.

Skyjack has added a new compact electric scissor lift to its slab scissor range with the introduction of the SJ3232 E. The SJ3232 E is designed for both indoor and outdoor use and features a narrow profile with an overall machine length of 91.5 inches( 2.32 meters). The unit can be driven at full height and does not require stabilizers, supporting productivity in confined work areas.

With a working height of 37 feet, seven inches( 11.46 meters) and a 550-pound( 249-kilogram) platform capacity, the SJ3232 E targets a range of construction, industrial and maintenance applications.

The electric slab scissor lift is powered by a rear-wheel brushless electric drive system that includes fully proportional lift and drive controls and an adaptive variable speed feature. Skyjack reports the system delivers smooth transitions on grades and offers 25 % gradeability.

The platform includes an all-steel anti-slip surface, multiple fall protection attachment points and a three-foot roll-out extension deck to increase working reach. The fold-down modular rail system allows for easier transport and reduced stowed height.

The SJ3232 E also incorporates onboard digital diagnostics that provide real-time operating data, including load-sensing information. According to Skyjack, service access points are designed for simplified maintenance, with common parts shared across the slab scissor range.

6 l March-April 2026