Each Lift Spotlight offers highlights on a specific type of equipment for the aerial lift and material handling industry. These manufacturers have provided details on the model of their choosing.

Lift-A-Loft AMR Series

The Lift-A-Loft AMR Series is a mobile elevated work platform designed to provide safe access for maintenance, inspection, and assembly operations where personnel need to work at height around large equipment or structures. A distinguishing feature of the AMR Series is its integrated overhead lanyard system, which is intended to provide a dedicated fall-arrest anchorage for operators when work requires stepping outside the platform onto an adjacent work surface.

In many maintenance environments, workers traditionally rely on fixed ladders, catwalks, or overhead building anchor systems to access elevated areas. The AMR Series offers an alternative approach by combining a maneuverable work platform with manufacturer-provided overhead fall-arrest attachment points. This configuration allows operators to maintain a connection to a tested anchorage while transitioning between the platform and the work area, when permitted by the employer’ s fall protection program and applicable safety procedures.

The compact design of the AMR Series enables the unit to maneuver in confined spaces commonly found in rail maintenance facilities, manufacturing plants, and aircraft assembly operations. Because the platform can be repositioned as work progresses, personnel can maintain access to multiple work locations without repeatedly climbing down to relocate equipment.

Typical applications include locomotive and railcar maintenance, aircraft manufacturing and maintenance, heavy vehicle service, industrial fabrication, and other operations where elevated access and fall protection are important considerations. By integrating mobility, elevated access, and overhead fall-arrest capability into a single platform, the AMR Series supports maintenance activities in environments where safe positioning and efficient access are critical to the work being performed.

www. liftaloft. com

MEC MME30

Indoor work increasingly requires more height from machines that need to navigate tight, finished, and high-density spaces. This is especially true in data centers and similar facilities, where overhead mechanical, electrical, and security infrastructure creates access challenges in areas with sensitive floors and limited room to maneuver.

The MEC MME30 was designed specifically to address these challenges. As the first and only self-propelled vertical mast lift to deliver a 36-foot indoor working height in a compact 32-inch-wide machine with a 78.5-inch stowed height, the MME30 provides higher access without requiring crews to move into a larger scissor or boom lift. Compared with these alternatives, the MME30 provides a highly cost-effective means of self-propelled access above 30 feet

Its compact 60-inch overall length and 32-inch width allow it to pass through a standard single doorway and maneuver through constrained building interiors. Once at height, operators can drive fully elevated indoors, reducing repeated lowering, repositioning, and elevating between work areas.

The MME30 also provides a 350-pound platform capacity and 20-inch deck extension, giving operators practical capacity and reach for punch lists, maintenance, overhead installations, and inspections. PMSR direct-electric AC drive motors and AGM maintenance-free batteries support efficient operation, while 5-inch-wide non-marking tires and MEC’ s patented Leak Containment System help protect sensitive finished floors.

Rugged steel construction and strengthened roller-mast components further prepare the MME30 for demanding, high-turn rental applications. By combining industry-leading vertical mast height, compact access, full-height drive capability, floor protection, and rental-ready durability, the MME30 gives crews a practical, productive, and cost-effective way to work higher indoors.

www. mecawp. com

20 l September-October 2026